The Cause Of The Burn Of The Workpiece During The Grinding Of The High-Speed CBN Wheel
Serviço
Contate-nos
nome da empresa: BEIJING DEMINA PRECISION MACHINERY CO., LTD
Tel 0086-10-62965622 0086-13910819265
E-mail:[email protected]
Endereço: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

The Cause Of The Burn Of The Workpiece During The Grinding Of The High-Speed CBN Wheel


2023-05-12


What is the cause of the burn of the workpiece during the grinding of the high-speed CBN wheel?

1. The hardness of the CBN grinding wheel is too high or the grain size is too fine;

2. The speed of the grinding wheel is too high for the workpiece;

3. Insufficient cutting fluid supply, too much feed, and poor heat dissipation conditions;

4. The CBN grinding wheel is not dressed in time or the dressing quality is poor;

5. The excessive vibration swing of the grinding wheel may cause burns due to the constantly changing grinding depth of the workpiece;

6. The clamping of the grinding bow and arrow is not firm enough, and the workpiece stops when grinding;

7. The burn is too deep during rough grinding, and the fine grinding reserve is too small to wear off;

So how do we tell if a piece is burned? Quite simply, it can be checked out by regular pickling. When the surface of the workpiece is wet, we should quickly carry out a visual inspection under the fluorescent lamp. The normal workpiece without burn is a uniform dark gray.


If the crack is cracked, it is a grinding crack. If gray or dark spots, it is decarbonization. If the software point, if there is a cloud-like dark spot, and the boundary is indefinite, it is a soft point. If there are dark patches, continuous lines, or discontinuous lines on the surface of the workpiece along the grinding direction of the grinding wheel, it is considered as a burn.

When grinding the workpiece, if there is a burn, we must find out the reason in time, and take limited measures to solve, only in this way can grinding out the standard quality products.

Saiba mais informações sobre nossos produtos consulte Mais informação