Installation And Commissioning Instructions OF Micra-10 Drill Bit Grinder Machine
Serviço
Contate-nos
nome da empresa: BEIJING DEMINA PRECISION MACHINERY CO., LTD
Tel 0086-10-62965622 0086-13910819265
E-mail:[email protected]
Endereço: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

Installation And Commissioning Instructions OF Micra-10 Drill Bit Grinder Machine


2023-05-19


Product Structure OF Micra-10 drill bit grinder

1. Horizontal feed: adjust the size of the horizontal feed and the amount of the grinding wheel, and the feed stroke is 7.8mm. 2. Longitudinal feed: adjust the size of the longitudinal feed and the amount of the grinding wheel, and the feed stroke is 32.4mm. 3. Air suspension spindle: The pneumatic suspension spindle is a patented product of DAREX Company of the United States, and it is also the only one in the world that uses pneumatic suspension. The principle is to sharpen the sharpening machine of the side edge of the milling cutter. The air suspension spindle guarantees the smoothness and ultra-precision of the side edge of the milling cutter. Spindle repeat positioning The accuracy is 0.005-0.007mm. 4. grinding wheel: the material is resin bonded grinding wheel, super wear-resistant, high precision, no need to repair. Super wear resistance: Take 10mm diameter milling cutter as an example, grinding 20 pieces per day, the grinding wheel can be used for 2 years. No need to repair: the grinding wheel can be used regularly with alcohol spray cleaning, no need to repair, and save time. 5. Motor: American Bart motor, strong heat dissipation, ultra-quiet. Sustainable operation. 6. Ferrule: 5C ferrule clamping cutter, excellent toughness and rigidity, can ensure the grinding accuracy. 7. Workbench: The working base is made of aluminum-manganese alloy for one-time precision casting. The manganese-aluminum alloy is not easy to rust, which makes the overall weight of the equipment drop, and it is easy to move and transport.

installation and commissioning instructions OF Micra-10 drill bit grinder Machine

1. Place the machine on a stable work platform. 2. Disassemble the motor transport bolts and rubber feet: there are 2 black longitudinal feed bolts under the machine motor. When debugging the machine, the transport bolts and rubber spring pads must be removed, and then proceed. operating. 3. Installation handle: Install the vertical and horizontal feed handles. When installing, apply the fastening glue on the handle threads to fix the handle. 4. Install the positioning ejector pin: Lock the screw that fixes the positioning thimble, put the positioning device in the innermost position, and wear a protective cover to prevent injury. 5. Install the air suspension spindle: After installing the air suspension spindle, ensure that the indexing plate is in the low position to prevent damage to the grinding wheel. 6. Connect the air pump: Connect at least 90 psi of compressed air to the spindle sleeve.

Notes OF Micra-10 drill bit grinder

1. When the equipment is not in use, the grinding wheel must be adjusted to the lowest position to ensure that the grinding wheel does not touch the grinding wheel during the movement; 2. Position the thimble to wear a protective cover when not in use to prevent injury; 3. When the sharpening rod is not in use, ensure that the indexing plate is in a low position locking state; 4. Clean the dirt in time after use to ensure that the machine is clean to prevent rust and affect the sharpening accuracy. 5. Regularly clean the ferrule and grinding wheel to ensure its sharpening accuracy and improve the service life of the grinding wheel.
Saiba mais informações sobre nossos produtos consulte Mais informação